How it works
You simply plug it in, restart your PC to boot into USB, and start using Boost PC!
Boost-PC Runs Through Your USB Port
Boost-PC is a flash drive stick that you insert into an available USB port on your PC. Built on the proven foundation of Linux, it bypasses the old, slow, bloated Windows operating system to make your PC into a blazing fast, high performance PC with a new, simple to use, operating system that has the familiar look and feel of your Windows PC. It even works with missing or faulty hard drives. Since it runs on a USB stick, your existing computer is not altered, and you will have access to all of your old files. You simply plug it in, restart your PC to boot into USB, and start using Boost-PC!
Boost-PC is easy to use and made for speed
Easy One-time Setup
We will send you everything you need to get started with Boost-PC. With our easy setup, you can be up and running – watching videos, writing emails, and browsing the web – in less than 20 minutes.
You will only need to set Boost-PC up once, and you can use the device on multiple computers. If you have any questions, our support team is always here to help.
Boost-PC works on most PCs twelve years old or newer, with the following specifications. Not sure if Boost-PC will work for your system? Just ask – our support staff is here to help.
|Processor||64-bit Intel or AMD chips running 700 MHz processor or higher. Boost-PC requires your CPU to have Physical Address Extensions, or PAE. PAE is provided by Intel Pentium Pro and above CPUs, including all later Pentium-series processors (except most 400 MHz-bus versions of the Pentium M). Pentium M and Celeron M do not support PAE so Boost-PC cannot load on systems with these processors.|
|RAM||512 MB (minimum) / 2 GB (recommended)|
|USB Port||System must have a USB 2.0 or 3.0 port|
|Network Card||Network card. (Wi-Fi or Wired)|
|Graphics||VGA, DVI, or HDMI supported.|